Azzurro 3Ph Hyd5000 Zss

Automatic management of photovoltaic, battery and network energy flows

» Integrated Energy Meter

» Can be connected in parallel

» Possibility of operation in zero network injection mode

» Unit compatible with high voltage lithium battery (200-750V)

» Autonomous support mode, guarantees continuity and island operation,

both from photovoltaic and battery sources, in the event of a power outage.

TECHNICAL DATA 3PH HYD5000 ZSS 3PH HYD6000 ZSS 3PH HYD8000 ZSS

Technical data DC input (photovoltaic)

Typical DC Power* 7500 W 9000 W 12000 W

Maximum DC power per MPPT 6000 W (480V-850V) 6600 W (530V-850V) 6600 W (530V-850V)

Number of independent MPPTs / Number of chains per MPPT 2/1

Maximum input voltage 1000 V

Activation voltage 250 V

Nominal input voltage 600 V

DC voltage MPPT range 180V-960V

DC voltage range at full load 250V-850V 320V-850V 360V-850V

Maximum input current for each MPPT 12.5A/12.5A

Maximum absolute current for each MPPT 15A/15A

Technical data for battery connection

Compatible battery type Lithium-ion (provided by Zucchetti)

Admitted voltage range 180V-750V

Number of independent drum channels 1

Maximum charging/discharging power 5000 W 6000 W 8000 W

Admitted temperature range** -10°C / +50°C

Maximum charging current per battery channel 25 A (peak of 40A for 60 s)

Maximum discharge current per battery channel 25 A (peak of 40A for 60 s)

Charging curve managed by battery BMS

Depth of discharge (DoD) 0%-90% (programmable)

AC output (network side)

Nominal power 5000 W 6000 W 8000 W

Maximum power 5500 VA 6600 VA 8800 VA

Maximum current 8 A 10 A 13 A

Connection type/Nominal voltage Three-phase 3/N/PE, 220/380, 230/400

Voltage range AC 184 V- 276 V (according to local standards)

Nominal frequency 50Hz/60Hz

Frequency range AC 45 Hz- 55 Hz / 55 Hz- 65 Hz (according to local standards)

Total harmonic distortion <3 %

Power factor 1 by default (programmable +/- 0.8)

Network injection limitation Programmable from the screen

EPS output (Emergency Power Supply)

Power supplied in EPS*** 5000 W 6000 W 8000 W

Peak apparent power in EPS*** 10000 VA for 60 s 22000 VA for 60 s 15000 VA for 60 s

Output voltage and frequency EPS Three-phase 230V/400 V 50 Hz

Suppliable current in EPS (peak) 8 A (15 A for 60 s) 10 A (18 A for 60 s) 13 A (24 A for 60 s)

Total harmonic distortion 3%

Switching time <20 ms

Efficiency

Maximum efficiency 98.0%

Weighted efficiency (EURO) 97.5%

MPPT efficiency 99.9%

Maximum battery charge/discharge efficiency 97.6%

Consumption in stand-by <15W

Protections

Internal interface protection yes

Safety protections Anti island, RCMU, ground fault monitoring

DC polarity reversal protection yes

Integrated DC disconnector

Overheat protection yes

Overvoltage category / Protection class Overvoltage Category III / Protective class I

Built-in AC/DC MOV arresters: Type 2 standard

Output overcurrent protection yes

Soft Start battery yes

Standard

EMC EN61000-1, EN61000-3

Safety standard IEC62109-1, IEC62109-2, NB-T32004/IEC62040-1

Network connection standard Certificates and connection standards available at www.zcsazzurro.com

Communication

Wi-Fi/4G/Ethernet communication interface (optional), RS485 (proprietary protocol), USB, CAN 2.0 (for connection with batteries),

Bluetooth

Other RS485 Line inputs for external meters (up to 4 meters can be connected), 6 digital inputs (5 V TTL),

connection for direct sensors (CT)

General information

Ambient temperature range supported -30-60 °C

Topology Without transformer

Environmental protection grade IP65

Relative humidity range allowed 0-100%

Maximum operating altitude 4000 m (in derating from 2000 m)

Noise levels < 45dB @ 1m

Weight 33 Kg

Cooling Natural convection

Measurements (H*L*D) 515mm*571mm*264mm

Screen LED screen and APP

10 year warranty