Cabel Interacumulator 160 liters Stainless Cabel IWH-E 160
Brand: Cabel
Reference: 784307
Description
The Cabel IWH-E Tank-In-Tank 160 Interaccumulator incorporates a 2.2 kW electrical resistance incorporated into the primary circuit to prevent its deterioration, made of stainless steel. The internal tank of the Tank-in-Tank preparer, totally submerged in the primary fluid of the heating circuit. Its large heat exchange surface (1.5 to 2.5 times greater than that of a traditional coil) allows a large amount of sanitary water to be heated in a very short time, which reduces the volume stored and limits energy expenditure. In addition, the large exchange surface reduces the number of stop/start cycles of the boiler that feeds the accumulator. This has the effect of improving the overall energy efficiency of the installation, reducing harmful emissions (NOx, CO) and increasing the useful life of the boiler burner.
Details
See characteristics in the attached technical sheet in PDF format.
Acumulator to install in floor or vertical wall position
Stainless steel inner container, Tank-in-Tank principle
High quality insulation: 30 mm CFC-free polyurethane
Luxury finish: Exterior casing in thick polyurethane, elegant and shock resistant
Stainless steel cavity for a probe to use a boiler with electronic regulation
Optional wall brackets
Duration of the start-up regime from 10 to 80ºC (With heating circuit): 22 min
Absorbable power (With heating circuit 85°C): 31 kW
TECHNICAL DATA:
Capacity: 160 liters, DHW outlets: 3/4", Tank in Tank Exchanger outlet: 1", Recirculation: 1", Lower coil capacity: 1.26m2 / 62 liters, Manhole: No, Resistance: Optional, Measurements, height, width and depth: 120.5x52.5x52.5 cm, Installation: Floor, Warranty: 2 years, Probe holder: YES
