Electronic Module For Et200S 4Ed DC 24V (5U) Siemens

SIMATIC DP electronic modules for ET 200S, 4 standard DI DC 24V, 15 mm width 5 units.

Supply voltage

 - Nominal value (DC) 24 V

 - Protection against polarity reversal Yes

Input intensity

 - supply voltage L+, max. depending on the sensor

 - background bus 3.3 V DC, max. 10mA

Sensor power supply

 - Min output voltage type. L+ (-0.5 V), with load

Output intensity

 ● Nominal value 500 mA

 ● Allowable range, lower limit 0 mA

 ● Allowable range, upper limit 500 mA

Losses

 - Losses, typ. 0.7W

Address area

Address space per module

 ● Address space per module, max. 1 byte

 ● with 4 bit packaging

Digital inputs

 - Number of digital inputs 4

 - Input characteristic according to IEC 61131, type 1 Yes

Input voltage

 ● DC input voltage type

 ● Nominal value (DC) 24 V

 ● for signal "0" -30 to +5 V

 ● for signal "1" +15 to +30 V

Input intensity

 ● for signal "1", typ. 7mA; at 24V

Input delay (at nominal input voltage)

for standard inputs

— parameterizable No

— in transition "0" to "1", max. 2ms; typ. 3ms

— in transition "0" to "1", max. 4.5ms

— in transition "1" to "0", min. 2ms; typ. 3ms

— in transition "1" to "0", max. 4.5ms

Cable length

● shielded, max. 1,000 m