Hidron.200L Vt.10Bar M1.1/2 Potable Accumulator
Brand: Cabel
Reference: VEP200L10B
Description
Hydropneumatic accumulator 200l vertical 10bar M 1.1/2" potable -10°/+99°C. Diameter of 550mm. and height of 1235mm. Cabel's VEP hydropneumatic accumulators are tanks that combine air/nitrogen and water or other fluid under pressure and They are commonly used in irrigation pumps, centrifugal pumps, submersible pumps and pumping equipment in general.Their main function is to guarantee a water reserve that allows reducing the number of starts and stops of the pumps, thus allowing not only to save energy but also prolong the life of the installation and its components.Built in high-quality carbon steel, they incorporate a special Zilan DW butyl membrane inside, very resistant and suitable for drinking water that ensures perfect operation with minimal maintenance and a magnificent resistance and durability.In addition, they are 100% manufactured in Europe under the strictest quality controls and factory tested one by one to guarantee their correctness. to function.
Details
Hydropneumatic accumulator 200l vertical 10bar M 1.1/2" drinkable -10°/+99°C. Diameter of 550mm. and height of 1235mm. Cabel's VEP hydropneumatic accumulators are tanks that combine air/nitrogen and water or another fluid under pressure and are commonly used in irrigation pumps, centrifugal pumps, submersible pumps and pumping equipment in general.Its main function is to guarantee a water reserve that allows reducing the number of starts and stops of the pumps, thus allowing no not only save energy but also prolong the life of the installation and its components.Built in high-quality carbon steel, they incorporate a special Zilan DW butyl membrane inside, very resistant and suitable for drinking water that ensures perfect operation with the minimum maintenance and magnificent resistance and durability.In addition, they are 100% manufactured in Europe under the strictest quality controls and factory tested one by one to guarantee their cor straight operation.
Comments
Questions (1)
Con una bomba submergible que subministra a 5'5 Barés seria adecuado para substituir dos esferas de membrana de 25 litros? Tiene que suministrar aigua a una altura de 30 mts a 2 Barés mínimo.
Esto es mejor que lo consultes con el instalador que vaya a realizar el cambio. Nosotros te podemos dar los datos técnicos de la bomba para revisar caudal y altura.
Saludos.
