Toroidal Transformer Wgc-80 Diameter 80Mm

WGC-80 toroidal transformer, diameter 80mm. In this new range, a series of improvements are presented, especially thinking about the installation of equipment in distribution boards. In addition to the usual fixings for installation, the possibility of doing so on a DIN rail using an accessory is added, making installation easier.

The WGC series differential transformer has better immunity against transient current spikes that usually cause differential protection trips. The WGC series differential transformer are designed to work with the WGC series relays. The sensitivity (trigger current) of the transformer-relay assembly is set by the associated relay.

SPECIFICATIONS

ALTERNATION POWER SUPPLY (INSULATION)

Impulse test (kV)

3 kV

MECHANICAL CHARACTERISTICS

Size (mm) width x height x depth

124.5 x 130 x 50 (mm)

Envelope

Self-extinguishing polycarbonate UL 94 V0

Fixation

DIN rail with accessory (see code)

Connection type

Screwable terminal (Pz screw type)

Net Weight (kg)

0.288

ENVIRONMENTAL CHARACTERISTICS

Degree of protection

IP 20 (Terminals) IEC 60529

Relative humidity (non-condensing)

5 ... 95 %

Working temperature

-20 ... + 70 ºC

CURRENT MEASUREMENT CIRCUIT

Dynamic intensity (Idyn)

2.5 Ith

Permanent thermal intensity (Icth)

60 A

Short circuit thermal intensity (Ith)

1.8 kA / 1s

Transformation ratio

30 / 0.06 A

Maximum service voltage (Um)

720 V

RULES

Electrical safety, Max altitude. (m)

2000

Electrical safety, Installation category

CAT III

Rules

IEC 60664-1, IEC 60664-3, IEC 60044-1

PRECISION OF MEASUREMENTS

Precision

10 … 15 %